PicoSource PG900 Series
USB differential picosecond pulse generators
TDR setup with PicoScope 9300 Sampling Oscilloscope
Controlled over USB from a single PC, the PG900 Pulse Generators can be used with a PicoScope 9300 Sampling Oscilloscope to realize time domain reflectometry with the models that do not integrate that functionality (PicoScope 9301, 9302, 9321 and 9341).
Single-ended measurements are possible using just one pulse source and an oscilloscope channel.
TDT setup with any PicoScope 9300 Sampling Oscilloscope
Controlled over USB from a single PC, the PG900 Pulse Generators can be used with a PicoScope 9300 Sampling Oscilloscope to measure time domain transmission with those models that do not include that function (PicoScope 9301, 9302, 9321 and 9341). They may also add the versatility of a remotely placed signal generator for long line or installed system testing with any of the PicoScope 9300 models.
Single-ended measurements are possible using just one pulse source and an oscilloscope channel.
TDT and crosstalk setup with PicoScope 9341 Sampling Oscilloscope
Controlled over USB from a single PC, the PG900 Pulse Generators can be used with a PicoScope 9341 Four-Channel Sampling Oscilloscope for simultaneous time domain transmission and crosstalk assessment.
Single-ended measurements are possible with a two-channel sampling oscilloscope. Differential measurements can also be tackled by first measuring transmission and then changing connections for crosstalk measurement. Unconnected ports should always be correctly terminated.