PicoScope 4824

PicoScope 4824 Accessories

Passive oscilloscope probes from 60 MHz to 9 GHz

Our ergonomically designed passive oscilloscope probes are suitable for use with all major brands of oscilloscopes as well as the PicoScope range of USB Oscilloscopes. Passive probes don't require a power supply or batteries so are lightweight and easily portable.

Read our free guide: How to Tune x10 Oscilloscope Probes.

Product Price Quantity
60 MHz high-impedance passive probe 1:1/10:1 with BNC
MI007
Recommended
£25.00

Active oscilloscope probes

This range includes high-voltage probes that extend the input range of your scope, and high-frequency probes that boost its input impedance for more accurate measurements.

All active probes require a power supply or batteries. Our battery-powered probes are supplied complete with batteries, while optional AC adaptors are available for the externally powered types. Read our application note: Choosing the right Pico Technology active differential probe.

Product Price Quantity
25 MHz 700 V differential oscilloscope probe 10:1/100:1
TA041
Recommended
£379.00
25 MHz 1400 V differential oscilloscope probe 20:1/200:1
TA057
Recommended
£379.00
50 MHz 70 V differential oscilloscope probe 10:1
TA058
Recommended
£479.00
70 MHz 7000 V differential oscilloscope probe 100:1/1000:1
TA044
Recommended
£919.00

Current probes (clamps)

Clamp-on current probes or “current clamps” enable you to measure currents without breaking the electrical circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped shut to form a magnetic loop around the conductor.

Current clamps offer a safe, cost-effective, simple and accurate way to take current measurements.

Our range of current clamps can be used with Pico Oscilloscopes and Pico Data Loggers, as well all major brands of oscilloscopes and multimeters.

Product Price Quantity
30 A AC/DC precision current probe, BNC connector
TA189
Recommended
£459.00
60 A AC/DC current probe, BNC connector
TA018
Recommended
£159.00
200 A / 2000 A AC/DC current probe, BNC connector
TA167
Recommended
£259.00
600 A AC/DC current probe, BNC connector
TA019
Recommended
£159.00

Accelerometers

We supply single-axis and three-axis accelerometers that connect to an oscilloscope for measuring noise and vibration.
Product Price Quantity
Three-axis accelerometer and oscilloscope interface
PP877
Recommended
£409.00

BNC terminators and leads

All our BNC terminators, attenuators, leads and adaptors are compatible with 50 Ω BNC connectors.
Product Price Quantity
Terminator: feed-through, 1 GHz 50 Ω 1 W BNC (m-f)
TA051
Recommended
£17.00
Attenuator set: 3-6-10-20 dB, 1 GHz 50 Ω 1 W BNC (m-f)
TA050
Recommended
£65.00
BNC plug to 4 mm (banana) plug cable, 1.2 m
MI029
£17.00
BNC to BNC cable, 1.1 m
MI030
£14.00
BNC plug to BNC plug cable, insulated, 5 m
TA130
£33.00

Clips, leads and 4 mm probes

From gator/croc clips to acupuncture probes, here you will find a variety of popular accessories for use with test and measurement equipment.

Our test clips are suitable for general-purpose test and measurement as well for automotive diagnostics applications. The test clips are designed for use with our range of test leads.

Product Price Quantity
Multimeter probe, 1 kV CAT II, black
TA001
£7.00
Multimeter probe, 1 kV CAT II, red
TA002
£7.00
Sprung hook probe, black
TA089
£7.00
Sprung hook probe, red
TA090
£7.00
Small crocodile clip, black
TA003
£5.00
Small crocodile clip, red
TA004
£5.00
Large dolphin clip, 1 kV CAT III, red
TA006
£10.00
Large dolphin clip, 1 kV CAT III, black
TA005
£10.00

Miscellaneous

Product Price Quantity
USB 3.0 cable, 1.8 m
TA155
£14.00
Hard carry case – medium
PP969
Recommended
£81.00
Calibration certificate for high performance PicoScope oscilloscopes: 4824, 5000 and 6000
CC028
Recommended
£129.00
USB 2.0 Y-cable, 1.8 m
TA146
£10.00
Documents Specifications