PicoLog 6.1.13 is now released and contains the following new features :

  • The PicoLog 6 app has been Apple Notarized for macOS 10.15 (Catalina)
  • We've added a feature to show capture progress on time-limited captures
  • We've added a feature that warns users of the potential capture size and duration based on users' available drive space


The following bugs were fixed:

  • Changing BAR to psi in settings has no effect for WPS500/WPS600 Automotive pressure transducers
  • Graph X-axis "From start" mode not starting from zero
  • When capturing with a circular buffer, not all old data is deleted
  • Some views are not getting loaded correctly
  • Table data and CSV export truncated when using long timebases
  • Maths Channel scaling issue
  • PicoScope 3000D devices with long serial numbers do not open

Apple Notarized for macOS 10.15 (Catalina)

Apple are introducing an additional layer of security for users of macOS 10.15 (Catalina) and onwards, so by default, all software not available from the AppStore must be notarized.

In Apple's words: 

"Notarization gives users more confidence that the Developer ID-signed software you distribute has been checked by Apple for malicious components. Notarization is not App Review."

New feature to show capture settings and capture progress on time-limited captures

When a fixed-time capture is started, users can now view the capture configuration that was set before the capture commenced within the info tab of the right-hand settings pane.

It is also possible to view progress of the capture, which is shown as a progress bar and a percentage of the total capture time.

New feature that warns users of the potential capture size and duration based on users' available drive space

Some capture configurations can be very large and it's not always obvious just how quickly users can fill up their PC's hard drive. This helpful feature warns users of the capture size and the time it would take to fill up the hard drive at its current free space capacity just before the capture is started. 

The dialog will also appear when adding additional channels to a capture already running.

PC requirements
   
Windows PC Windows 7, 8.x, 10 (32 and 64-bit)
Mac computer From macOS 10.12 (Sierra) or newer
Linux PC Tested on Ubuntu 16.04 LTS or newer (64-bit), and OpenSUSE 15.x or newer (64-bit)
RaspberryPi

Compatible with Raspbian Buster or newer using Raspberry Pi model 4B.

Note: Also works with model 3B and 3B+ although GUI response time is slower, and we recommend a sampling rate no faster than 1 S/s.

Does not work with Raspbian Stretch or Jessie