This new series of passive oscilloscope probes dramatically lowers the cost of performing low-invasive measurements on gigahertz-frequency circuits. The PicoConnect probes have an extremely low input capacitance of typically 0.3 pF, which minimizes disturbance to the device under test and ensures a well-defined pulse response. This makes them more accurate than expensive active probes at very high frequencies.
Prices from only $699 / €579 / £449
You may remember a few months ago we posted a video from the International Microwave Symposium, where Mark Ashcroft, our RF Business Development Manager, mentioned a secret new product under development. That product was revealed to the world at European Microwave Week as the PicoConnect 900 Series of low-invasive RF, microwave and gigabit probes. In this video, taken at the launch, Mark tells us a bit more about the range.
For three days of EuMW, we ran a prize draw to win a PicoScope 2207B, one of the new PicoScope 2000 Series oscilloscopes we launched earlier in the year. We're very happy to tell you that our three winners were as follows:
Congratulations to all of you. We hope you’re enjoying using your new scope!
It's always great to get good feedback from our customers, and even better when they show us how they use our scopes. In this case, Janne Pohjale tells us about his PicoScope 2204A and how he's combined it with an 8" tablet to make a truly "ultra mobile scope".
EM Media, the group behind Electronics Maker magazine, hosted the second annual EM Best of Industry Awards ceremony on 21 September. We're very pleased to report that Pico came first in the Best Portable Test Solutions category.
Q. I'm using PicoLog with a PicoScope 2000 Series scope. I was taking readings every 10 ms and decided to change to every 1 ms, but the timings are the same. Is this because the PicoScope can't go any faster?
A. It can go faster, but you need to change the sampling mode. You are probably using the default Real Time Continuous mode, which limits you to low sampling rates. Click Settings > Recording and change the Recording method to Streaming (single converter only). This will give access to faster sampling rates.
Q. In PicoScope 6, how can I record a sweep, then save that as a stand-alone file before beginning the next? That would allow me to let the unit run indefinitely and analyze the files in the directory without having to interrupt the program.
A. The Alarms feature is what you need. First set up a trigger, then go to Tools > Alarms. Set the Event type to Capture, then click Add and set the Action to Save Current Buffer. You then need to tell PicoScope where to save the files. Then, back in the Alarms dialog, make sure that you check the box next to the new Save Current Buffer action to enable it. PicoScope will now save every captured waveform in a new file.
Please visit Pico Exhibitions for the latest list of exhibitions and trade shows that Pico and its representatives will be attending.
Thanks to our continuing success and growth Pico are always seeking talented people to join our company.
Please visit https://jobs.picotech.com/ to see our current vacancies. We look forward to hearing from you!
Our latest software releases are available as free downloads. To check which release you are using, start the software and select Help > About.
To make sure that your Pico newsletter reaches your inbox every month, add email@example.com to your email address book or safe list. If you found this newsletter useful, please recommend it to your friends and colleagues. Back issues are available from our newsletter archive.
Pico Technology, James House, Colmworth Business Park, St. Neots, Cambridgeshire, PE19 8YP, England
Tel.: 01480 396395 (+44 1480 396395)
Fax: 01480 396296 (+44 1480 396296)
Pico Technology North America Inc.
320 N Glenwood Blvd.
Tel:+1 800 591 2796 (Toll Free)
Fax:+1 620 272 0981
Web technical support: www.picotech.com/tech-support/