PicoSDK 10.7.26

A software development kit (SDK) containing drivers for your PicoScope or PicoLog device. This is not an application.

* For software examples, please visit https://github.com/picotech
* PicoScope 6000E Programmer's Guide can be found at https://www.picotech.com/helpfiles/6000a-api/index.html

* We advise you to use the examples from our GitHub repositories.

Release notes

PicoScope 2000

Ensured every waveform in Streaming in PS2203, PS2204, PS2204A, PS2205 and PS2205A get captured in their entirety
Fixed time offset of triggered streaming waveforms with certain settings on PicoScope 2203, 2204, 2204A, 2205, 2205A

PicoScope 2000a

Fix issue initialising channels to certain voltage ranges on PicoScope 2206A, 2207A, 2208A
Fix for ETS with 4 channels enabled gives incorrect amplitude problem

PicoScope 3000a

Pulse width trigger causing a driver crash on PicoScope 3204/5/6 A/B models problem fixed
ETS with 4 channels enabled gives incorrect amplitude bug fixed

PicoScope 4000

Fix for: frequency counter warns of over range and signal disappears when measuring 0Hz

PicoScope 4000a

Fix issue with window trigger missing fast transitions on PicoScope 4225 4225A 4425 4425A
Fix for TA301 Not updating power pins when switching to 2000A mode from being off
Fixed AC coupled offset when a probe is connected
Fix for samples being lost when streaming at maximum rate, PicoScope 4224A 4424A 4824A
Fix for frequency counter with BNC lead malfunction if BNC+ probe was previously plugged into a channel

PicoScope 5000a

PicoScope 6000

PicoScope 6000a

New device variant PicoScope 6428E-D added
Fix for all waveforms having the same trigger time offset when capturing multiple waveforms
Fix issues affecting pulse width triggers on MSO digital inputs
Fix crash when setting probe callback before opening unit (Mac and Linux)

TC-08 Thermocouple Data Logger

Fix for type B thermocouple scaling not working when Cold Junction Compensation (CJC) is below 20 Degrees C

Please note: this SDK does not contain Linux drivers.