Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.

Probe holder kit with 4 x P2056 500 MHz probes

The PQ217 probe holder and PCB holder kit is a valuable accessory for any BNC-input oscilloscope up to 500 MHz bandwidth. It has been designed exclusively for use with the range of 2.5 mm probes from Pico, of which four P2056 500 MHz probes are included in this kit. Also included in the kit is an A4-sized (about 9" x 11") steel base plate, four PCB holders, four probe holders, and eight colored elastic cable ties. The kit is ideal for making hands-free measurements, for PCB inspection, and even as a soldering station!

The base plate provides the secure footing for your probe positioning system. It's mirror finished, allowing you to see the underside of the PCB to view any status LEDs during test.

Your PCB is fixed into place with four powerful magnetic posts employing spring-loaded clamps to grip the PCB under test. The clamps use a pair of replaceable insulating washers to avoid shorting tracks on the PCB.

With strong magnets at their base, the four gooseneck probe holders offer a flexible way to position the probe tip while holding it firmly poised in place. Their unique design employs a precisely weighted probe holder that pushes the sprung probe tip just enough to make a good contact on your PCB or unit under test. The kit includes eight pairs of silicone cable ties in the PicoScope channel colors (blue, red, green, yellow, purple, gray, light blue and magenta). These elastic rubber ties secure the probe cable to the probe holder gooseneck, adding stability and also a neat way of identifying which probes are connected to which channels (especially useful with an eight-channel oscilloscope!)

Shows a human hand placing a scope probe held by a probe holder on to a PCB being held in place by the PCB stands
Out of stock.
Pre-order now.
£739
Title Language Issue Size Updated All products All languages All documents Status
Probe positioning system User’s Guide English 2 1 MB May 21 2020 English open

Accessories for the Probe holder kit with 4 x P2056 500 MHz probes

Product Price Quantity
2.5 mm oscilloscope probe advanced accessory kit
TA065
£41
2.5 mm oscilloscope probe basic accessory kit
TA066
£17
2.5 mm oscilloscope probe solid contact tips, pack of 5
TA068
£14
2.5 mm oscilloscope probe spring contact tips, pack of 5
TA064
£22
2.5 mm oscilloscope probe standard accessory kit
TA067
£29
P2036 passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, dual pack
TA479
£219
P2036 passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, single pack
TA436
£139
P2056 passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, dual pack
TA480
£269
P2056 passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, single pack
TA437
£165
1.5 GHz low-impedance passive oscilloscope probe 10:1 with BNC
TA062
£275
1.5 GHz low-impedance passive oscilloscope probe 10:1 with SMA
TA061
£245
Passive oscilloscope probe: 350 MHz 2.5 mm high-impedance 10:1,  BNC
TA150
£139
Passive oscilloscope probe: 500 MHz 2.5 mm high-impedance 10:1,  BNC
TA133
£149