Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.

Probe holder kit, no probes

The PQ215 probe holder and PCB holder kit is a valuable accessory to your PicoScope 6000 Series oscilloscope. It has been designed exclusively for use with the 2.5 mm probes included with every PicoScope 6000 Series oscilloscope past and present (TA061, TA062, TA101, TA151, TA133, P2036 and P2056). Included in the kit is an A4-sized (about 11" x 9") steel base plate, four PCB holders, four probe holders and eight colored elastic cable ties. The kit is ideal for making hands-free measurements, for PCB inspection, and even as a soldering station!

The base plate provides the secure footing for your probe positioning system. It's mirror finished, allowing you to see the underside of the PCB to view any status LEDs during test.

Your PCB is fixed into place with four powerful magnetic posts employing spring-loaded clamps to grip the PCB under test. The clamps use a pair of replaceable insulating washers to avoid shorting tracks on the PCB.

With strong magnets at their base, the four gooseneck probe holders offer a flexible way to position the probe tip while holding it firmly poised in place. Their unique design employs a precisely weighted probe holder that pushes the sprung probe tip just enough to make a good contact on your PCB or unit under test. The probe holders include eight pairs of silicone cable ties in the PicoScope channel colors (blue, red, green, yellow, purple, gray, light blue and magenta). These stretchy rubber ties secure the probe cable to the probe holder gooseneck, adding stability and also a neat way of identifying which probes are connected to which channels, which is handy with a four channel oscilloscoope and especially useful with an eight-channel oscilloscope!

In Stock. Available for despatch.
£259
Title Language Issue Size Updated All products All languages All documents Status
Probe positioning system User’s Guide English 2 1 MB May 21 2020 English open

Accessories for the Probe holder kit, no probes

Product Price Quantity
P2036 passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, dual pack
TA479
£219
P2036 passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, single pack
TA436
£139
P2056 passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, dual pack
TA480
£269
P2056 passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, single pack
TA437
£165
Passive oscilloscope probe: 350 MHz 2.5 mm high-impedance 10:1,  BNC
TA150
£139
Passive oscilloscope probe: 500 MHz 2.5 mm high-impedance 10:1,  BNC
TA133
£149
1.5 GHz low-impedance passive oscilloscope probe 10:1 with BNC
TA062
£275
1.5 GHz low-impedance passive oscilloscope probe 10:1 with SMA
TA061
£245