Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.
This range includes high-voltage probes that extend the input range of your scope, and high-frequency probes that boost its input impedance for more accurate measurements.
All active probes require a power supply or batteries. Our battery-powered probes are supplied complete with batteries, while optional AC adaptors are available for the externally powered types. Read our application note: Choosing the right Pico Technology active differential probe.
For making differential measurements from millivolts to 1000V CAT III also consider the PicoScope 4444 differential input oscilloscope
The TA057 is a 25 MHz bandwidth active differential probe suitable for high common-mode voltage measurement applications up to ±1400 V (DC + peak AC).
This differential probe extends the capability of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.
|Title||Language||Issue||Size||Updated||All products||All languages||All documents||Status|
|TA057 25 MHz 1400 V Differential Probe User’s Guide||English||1||381 KB||Nov 07 2016||English||open|
|Choosing the right Pico Technology active differential probe||English||3||2 MB||Jul 13 2017||English||open|
|TA057 differential oscilloscope probe specifications|
|Bandwidth||DC to 25 MHz (–3 dB)|
|Rise time||14 ns|
|Input impedance||4 MΩ// 5.5 pF each side to ground|
|Differential range||±140 V (DC + peak AC) or 140 V RMS @ 20:1
±1400 V (DC + peak AC) or 1000 V RMS @ 200:1
|Common mode range||±1400 V (DC + peak AC) or 1000 V RMS @ 20:1 and 200:1|
|Absolute max. voltage
(differential or common mode)
|±1400 V (DC + peak AC) or 1000 V RMS CAT III
@ 20:1 and 200:1
|Max. amplitude||±7 V into 50 kΩ load|
|Offset (typical)||< ±5 mV|
|Noise (typical)||0.7 mV RMS|
|Source impedance (typical)||1 Ω @ 1 kHz, 8 Ω @ 1 MHz|
|CMRR (typical)||80 dB @ 50 Hz; 60 dB @ 20 kHz|
|Ambient operating temperature||–10 to +40 °C|
|Ambient storage temperature||–30 to +70 °C|
|Standard||4xAA cells or 6 V DC / 60 mA mains adaptor or regulated 9 V DC / 40 mA mains adaptor|
|Length of input leads||45 cm|
|Length of BNC lead||95 cm|
|Weight||400 g (including probe and PVC jacket)|
|Dimension (LxWxH)||170 mm x 63 mm x 21 mm|