PicoScope 4444 accessories
High-resolution differential USB oscilloscope
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.
|Title||Language||Issue||Size||Updated||All products||All languages||All documents||Status|
|PicoScope 4444 Quick Start Guide||English
|2||4 MB||May 03 2017||English
|PicoConnect 441 EU Declaration of Conformity||English||1||317 KB||Mar 30 2017||English||open|
|PicoConnect 441 1:1 differential probe specifications|
|Working voltage||50 V DC, 42.4 V peak AC|
|Overvoltage protection||100 V DC + peak AC|
|Connector||1 x red, 1 x black 4 mm plugs, unshrouded. Crocodile clip on screen/ground.|
|Connector||D9(m) with screw locks. Only for connection to PicoScope 4444 differential oscilloscope.|
|Bandwidth (–3 dB)||15 MHz|
|Overall length||1.2 m|