Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.

Current probes (clamps)

Clamp-on current probes or “current clamps” enable you to measure currents without breaking the electrical circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped shut to form a magnetic loop around the conductor.

Current clamps offer a safe, cost-effective, simple and accurate way to take current measurements.

Our range of current clamps can be used with PicoScope Oscilloscopes and PicoLog Data Loggers, as well all major brands of oscilloscopes and multimeters.

600 A AC/DC current probe, BNC connector

The TA019 current clamp can measure AC and DC currents up to 600 amps. Features:

  • Two current ranges controlled by selector switch
  • Low–battery indicator 
  • Zero offset button
  • BNC type connectors
  • Screened lead for noise suppression
TA019 600 A AC/DC current probe, BNC connector
£99
Title Language Issue Size Updated All products All languages All documents Status
TA019 600 A BNC Current Clamp Operator’s Manual English 3 65 KB Aug 08 2016 English open
TA019 Current probe characteristics
Accuracy DC 0 to 600 A  ± (2% reading +2 A)
AC 0 to 300 A  ± (2% reading +2 A)
AC/DC 300 A to 500 A  ± (3% reading +2 A)
AC/DC 500 A to 600 A  ± (6% reading +2 A)
AC frequency range 50 Hz  to 400 Hz
Voltage output 1 mV  per 1 A  (0 to 600 mV  AC & DC)
Max conductor size 30 mm
Output connectors BNC with screened lead
Operating environment 0 °C  to 50 °C, 70% RH
Battery life 100 hours with carbon zinc
Battery type 9 V DC NEDA 1604, 6F22, 006P
Dimensions 178 mm x 70 mm x 33 mm