Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.

Current probes (clamps)

Clamp-on current probes or “current clamps” enable you to measure currents without breaking the electrical circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped shut to form a magnetic loop around the conductor.

Current clamps offer a safe, cost-effective, simple and accurate way to take current measurements.

Our range of current clamps can be used with PicoScope Oscilloscopes and PicoLog Data Loggers, as well all major brands of oscilloscopes and multimeters.

60 A AC/DC current probe, 4 mm (banana) plug connector

The TA009 current probe can measure currents from 10 mA up to 60 A with a switch selectable high and low range. When measuring DC current, a simple push button is included for zero adjustment. 

This current probe is equipped with 4 mm connectors compatible with multimeters. For plugging into an oscilloscope we suggest using an MI078 BNC to 4 mm adaptor.

60 A AC/DC current probe, 4 mm (banana) plug connector
Title Language Issue Size Updated All products All languages All documents Status
TA009 current probe characteristics
Input ranges (DC) Low (1 mV/10 mA): 10 mA to 20 A  
High (1 mV/100 mA): 100 mA to 60 A
Input ranges (AC RMS) Low (1 mV/10 mA): 10 mA to 20 A  
High (1 mV/100 mA): 100 mA to 60 A
AC frequency range Up to 20 kHz
Maximum conductor size 9 mm
Output connectors 4 mm banana plugs
Operating environment 0 °C  to 50 °C, 70% RH
Dimensions 195 mm x 70 mm x 33 mm
Battery type 9 V DC NEDA 1604, 6F22, 006P
Battery life 100 hours typical with alkaline

Full specifications including accuracy can be found in the downloadable user guide.