TETRIS 2500 2.5 GHz high-impedance active oscilloscope probe 10:1

Pico Technology presents a unique Inline Probing System – the TETRIS® active probe. The unique design of the TETRIS 2500 active probe allows for contact to adjacent square pins with 2.54 mm pitch simultaneously. This is possible due to the probe's T-shaped housing, which allows many probes to be positioned next to each other and multiple measurements to be taken at the same time.

The TETRIS 2500 is independent of any particular system, and with its BNC connector and supplied SMA adaptor, it can be plugged into any measuring instrument with a 50 Ω input. With an input resistance of 1 MΩ and an input capacitance of 0.9 pF the TETRIS 2500 probe is suitable for measurements in all frequency ranges. Unlike passive probes the TETRIS 2500 active probe offers a high input impedance into the GHz range.  These characteristics make it the ideal probe for most of your daily measurements.

The TETRIS 2500 probe is shipped with a comprehensive set of accessories and durable soft pouch for safe storage.

TA223 TETRIS 2500 Active High Z probe specifications
Attenuation 10:1
Input impedance 1 MΩ || 0.9 pF
Input coupling of the measuring instrument 50 Ω
Probe bandwidth (–3 dB) 2.5 GHz
System bandwidth (–3 dB) 2 GHz (*)
Input dynamic range ±8 V
Max. input voltage 20 V
Cable length 1.3 m
Supply voltage Power supply included
Altitude Operating: up to 2000 m
Storage: up to 15 000 m
Temperature range Operating: 0° C to +45° C
Storage: –40° C to +71° C
Maximum relative humidity (operating) 80 % relative humidity for temperatures up to +31 °C, decreasing linearly to 40 % at +50 ° C


(*) with >500 MHz oscilloscope

In stock. Available for despatch.
Title Language Issue Size Updated All products All languages All documents Status
TETRIS Probes User’s Guide English 3 474 KB Nov 04 2019 english open