Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.

70 MHz 7000 V differential oscilloscope probe 100:1/1000:1

The TA044 is an active differential probe suitable for high common-mode voltage measurement applications up to ±7000 V (DC + peak AC).

This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.

70 MHz 7000 V differential oscilloscope probe 100:1/1000:1 TA044
£589.00
Title Language Issue Size Updated All products All languages All documents Status
TA044 70 MHz 7000 V Differential Probe User’s Guide English 1 476 KB Nov 07 2016 English open
Choosing the right Pico Technology active differential probe English 1 700 KB May 17 2016 English open
TA044 differential oscilloscope probe specifications
Bandwidth DC to 70 MHz (–3 dB)
Attenuation ratio 100:1/1000:1
Accuracy ±2%
Input impedance 10 M Ω // 10 pF each side to ground
Input voltage 
Differential range* (100:1)
max. differential* (1000:1) 
±700 V (DC + peak AC) or 700 V RMS
±7000 V (DC + peak AC) or 5000 V RMS
Common mode range ±7000V (DC + peak AC) or 2500 V RMS
(100:1 & 1000:1)
Absolute max. voltage (common mode) ±7000 V (DC + peak AC) or 2500 V RMS
(100:1 & 1000:1)
Absolute max. voltage (differential mode) ±7000 V (DC + peak AC) or 5000 V RMS
(100:1 & 1000:1) 
Output voltage
Swing ±7V into 50 kΩ load 
Offset (typical)  <±5 mV 
Noise (typical) 0.9 mV RMS
Source impedance (typical) 50 Ω
CMRR (typical) 80 dB @ 60 Hz; 50 dB @ 1 MHz
Ambient operating temperature –10 to 40 ℃
Ambient storage temperature –30 to 70 ℃
Power requirements 
Standard 4xAA cells or 6 V DC / 200 mA mains adaptor
or regulated 9 V DC / 120 mA mains adaptor
Length of input leads  60 cm
Length of BNC lead 90 cm
Weight 500 g
Dimension (LxWxH)  202 mm x 83 mm x 38 mm