Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.

Active oscilloscope probes

This range includes high-voltage probes that extend the input range of your scope, and high-frequency probes that boost its input impedance for more accurate measurements.

All active probes require a power supply or batteries. Our battery-powered probes are supplied complete with batteries, while optional AC adaptors are available for the externally powered types. Read our application note: Choosing the right Pico Technology active differential probe.

For making differential measurements whether measuring millivolts or upto 1000V CAT III consider also our PicoScope 4444 differential input oscilloscope

25 MHz 700 V differential oscilloscope probe 10:1/100:1

The TA041 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700 V  (DC + peak AC). It can be used with signal speeds of up to 25 MHz.

This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.

The TA041 is an active probe and therefore requires power to function. Four AA batteries are included as standard. Not included as standard but available as optional extras, the PS008 power supply and TA059 Probus power adapter are also available to purchase.

high voltage active differential oscilloscope probe
£269
Title Language Issue Size Updated All products All languages All documents Status
TA041 25 MHz 700 V Differential Probe User’s Guide English 4 235 KB Nov 07 2016 English open
Choosing the right Pico Technology active differential probe English 3 2 MB Jul 13 2017 English open

Accessories for the 25 MHz 700 V differential oscilloscope probe 10:1/100:1

Product Price Quantity
9 V AC power adaptor
PS008
£18
Battery pack for active differential probe
TA047
£56
Probus power adaptor for active differential probes
TA059
£41
Lemo power cable for Pico TA04x and TA05x active differential probes
TA331
£57
TA041 differential oscilloscope probe specifications
Bandwidth DC to 25 MHz  (–3 dB)
Attenuation ranges 10:1 / 100:1
DC accuracy ±2%
Rise time Rise time
Input impedance 4 MΩ ∥ 5.5 pF each side to ground
Input voltage
Differential voltage range (10:1)
Differential voltage range (100:1)
±70 V (DC + peak AC) or 70 V RMS
±700 V (DC + peak AC) or 700 V RMS
Common mode voltage range ±700 V (DC + peak AC)
or 700 V RMS(10:1 and 100:1)
Absolute maximum voltage
(differential or common-mode)
±1400 V (DC + peak AC)
or 1000 V RMS CAT III (10:1 and 100:1)
Output
Swing ±7 V into 2 kΩ load
Offset (typical) <±5 mV
Noise (typical)  0.7 mV RMS
Source impedance (typical)  1 Ω @ 1 kHz, 8 Ω @ 1 MHz
CMRR (typical) 86 dB @ 50 Hz; 66 dB @ 20 kHz
Ambient operating temperature −10 to +40 °C
Ambient storage temperature −30 to +70 °C
Ambient operating humidity 25 to 85% RH
Power requirements 4 AA cells or 6 V DC 60 mA mains adaptor
or regulated 9 V DC 40 mA mains adaptor
Length of input leads 45 cm
Length of BNC lead 95 cm
Weight 400 g (inc. probes and PVC jacket)
Dimensions 170 mm x 63 mm x 21 mm