Test and Measurement Forum

What I have is an ION Implant system that is used in semiconductor manufacturing. The implant system is an EATON/Axcelis 6200 model. It currently uses an old HP1340X-Y display/scope to emulate the characteristics of the ION beam. The input signals are simple Vertical(y), Horizontal(x) and TTL blanking circuit. Do you think it is possible for the 4424 picoscope to replace this real-time legacy scope? The ouput should be as close as real time as possible since the system operators manipulate system parameters to achieve the best ION beam quality.

Hi,
The 4424 will certainly be fast enough but it does not have a "Z" axis modulation (or TTL blanking) input. If that is critical, then we cannot help.
Regards,
PeterF.