6404B and D model not allowing single event trigger

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
lenkoop
Newbie
Posts: 0
Joined: Thu Feb 14, 2013 7:47 pm

6404B and D model not allowing single event trigger

Post by lenkoop »

Using the most current version (as of 9/18/2014) of Picoscope for Windows and two 6404Ds and one 6404B over a USB hub. Three Picoscope sessions open and I cannot consistently or sometimes ever get the scopes to allow me to set up for a single event trigger. I have to use repeat trigger setting to gather my single event. The frame buffer is set to 1. I only want a single shot of my event without allowing an accidental trigger.

Hitesh

Re: 6404B and D model not allowing single event trigger

Post by Hitesh »

Hi Lenkoop,

Please could you configure PicoScope 6 for the single trigger event, then click File -> Save As, save to a Settings File (*.pssettings), and post it here or send to support@picotech.com

We can then investigate this further using your setup information.

Many thanks,

Post Reply