WORKING WITH MULTIPLE CONVERSORS

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
JGARCIA
Guest
PostPosted: Thu Sep 11, 2003 9:49 am    Post subject: WORKING WITH MULTIPLE CONVERSORS Reply with quote
Dear sirs:

When you work with two different conversors, is it possible to calculate a parameter taking data from both conversors? For example, if I had a TC-08 with 8 termocouples and an ADC-16 with 8 channels measuring voltage, could I calculate a parameter combining the data given by TC-08 channel 1 and ADC-16 channel 1?

Thank you very much in advance.

Best regards,
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 610

PostPosted: Thu Sep 11, 2003 2:56 pm    Post subject: Reply with quote
Hi,

It is possible to use calculated parameters with values taken from one channel of a TC-08 and another from ADC-16.

Settings | Calculated Patameters

Select the TC-08 channel for A and ADC-16 channel for B, the order here does not matter.

Now enter the mathematical formula in the box below and if you want to se the units click on options and complete this part too. Click ok and the calculated parameter will be displayed in the recorder window, similiar to a channel.

Best regards,
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group