compability enviromon current recorder and an ADC10/11

 
Post new topic   Reply to topic    Pico Technology Forum Index -> USB PC Data Loggers
Author Message
daliti
Newbie


Joined: 28 Jan 2008
Posts: 1

PostPosted: Mon Jan 28, 2008 2:54 pm    Post subject: compability enviromon current recorder and an ADC10/11 Reply with quote
We want to measure pressure, voltage current and temperature at the same time. We've bought in the past an ADC10/11 and an TC08 module. voltage and pressure (ADC convertor) and temperature (thermocouple) aren't a problem.

We aren't able to measure a large current correct with our ADC convertor. The three current clamps have an VAC output which cannot be read in by the ADC 10/11. Even with the bridge rectifier, the same problem occurs by giving wrong meassurements.

Is it possible to send me an schematic of a possible filter or convertor so we can meassure simultanious the 3 currents and the other inputs (pressure, voltage and temperature)?

Any solution for my problem?


Kindly regards

Daliti
Back to top
picojohn
Site Admin
Site Admin


Joined: 11 Jun 2007
Posts: 391

PostPosted: Mon Jan 28, 2008 4:09 pm    Post subject: Reply with quote
Hello daliti,

It could be possible to achieve what you need with our EnviroMon system (http://www.picotech.com/enviromon.html). The shortest sampling interval is 1 minute and, if that is frequent enough and if you wish to detail your specific overall needs, then I shall be pleased to suggest a configuration.

It may also be possible to achieve what you need by using a combination of our converters running under PicoLog software, and again, I would need details of your specific requirements.

Regards
John
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> USB PC Data Loggers
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group