help with an ADC10 and Labview8.2

 
Post new topic   Reply to topic    Pico Technology Forum Index -> LabVIEW
Author Message
iz3dmq_luca
Newbie


Joined: 26 Aug 2007
Posts: 1

PostPosted: Sun Aug 26, 2007 11:14 pm    Post subject: help with an ADC10 and Labview8.2 Reply with quote
Hello.
i 'm using an ADC10 LPT device , normally, with pico softwares.
i woul like to start to learn something about the use of this transducer with labview 8.2
i'm finding a gentleman that helps me to understand like interface the adc10 with a labview and if i need some particular drivers to work.

to start my experience i would like to duplicate a easy chart recorder for a temperature probe that i'm just using with pico-log-recorder who gives me a 0-5 vdc signal from 0 to 100 Celsius degrees .
someone can help me?
mny tks
Back to top
gruntman
Guru
Guru


Joined: 28 Sep 2006
Posts: 96
Location: Garden City, KS USA
PostPosted: Wed Sep 19, 2007 6:49 pm    Post subject: Reply with quote
iz3dmq_luca,

The attached example will allow you to use the ADC-10 to log your temperature probe between 0-100C. If you have any questions feel free to ask...

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com

adc10_log_temp.vi
 Description:
ADC-10 Labview 8.2 converted to measure between 0-100 C

Download
 Filename:  adc10_log_temp.vi
 Filesize:  13.89 KB
 Downloaded:  115 Time(s)
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> LabVIEW
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group