|
|
| Author |
Message |
Fon
Guest
|
 Posted: Fri Nov 03, 2006 3:42 pm Post subject: ADC-16 Problem |
 |
|
Hello,
I have some problem about ADC-16. Last time I could connected with PLW Recorder. But today when I connected againg it show that
ADC16 driver version 2.4
ADC16 Unit not found
I try to uninstall and again new install. But it still show the same
problem.
Regards,
Fon |
|
| Back to top |
|
 |
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Mon Nov 06, 2006 9:30 am Post subject: |
|
|
Hello,
Thank you for your post.
It sounds like PicoLog is looking for the ADC16 on the wrong COM port. Please check your COM ports and try again.
Let me know if your problem persists.
Best regards,
Michael |
|
| Back to top |
|
|
Fon
Guest
|
| Posted: Thu Nov 09, 2006 11:59 am Post subject: |
|
|
Hi, Michael
Thank you for your answer. I already checked this problem.
I think this problem not come from using the wrong COM port.
I also install iPDA with another PC but it's still show the same problem.
I suspect at ADC-16 convertor failure. Is it possible?
How can I check this problem?
Thanks again.
Best regards,
Fon |
|
| Back to top |
|
|
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Thu Nov 16, 2006 11:42 am Post subject: |
|
|
Hello Fon,
YOu will need to check the unit on another machine.
If it still fails, you will need to return it to us for repair. Email support@picotech.com for further support.
Best regards,
Michael |
|
| Back to top |
|
|
Fon
Guest
|
| Posted: Wed Nov 22, 2006 1:27 am Post subject: |
|
|
Hello Michael ,
Thank you so much for your recommend. Now I made contact with company to send the ACD-16 converter for repairing.
Best regards,
Fon |
|
| Back to top |
|
|
|
Cart
Email