|
|
| Author |
Message |
Adel
Active User
Joined: 13 Sep 2006
Posts: 5
Location: Montreal
|
 Posted: Wed Nov 01, 2006 7:40 pm Post subject: 3206 Model - Channel A stuck at 10.7V |
 |
|
Today when I plugged my 3206 Channel A is showing 10.7V (no probe, no input to it). Could you please advise what is going on, is there a reset to this situation?
Thank you. |
|
| Back to top |
|
 |
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Thu Nov 02, 2006 9:21 am Post subject: |
|
|
Hello Adel,
Sorry to hear of this.
You will need to return the unit to us for repair I'm afraid. Please contact support@picotech.com for an RMA number and procedure.
You will need to include your scope serial number and address.
Best regards,
Michael |
|
| Back to top |
|
|
Adel
Active User
Joined: 13 Sep 2006
Posts: 5
Location: Montreal
|
| Posted: Fri Nov 03, 2006 3:00 am Post subject: Channel A stuck at 10.7V |
|
|
Hello Michael,
Thank you for your prompt answer, I will send the unit for repair. I checked in the previous discussions and forums, and the same case of channel A freezing appeared on some occasions. Is this a hardware problem that need to be fixed? It would reassuring to know what exactly is causing this. My unit is only 2 months old...
Thank you. |
|
| Back to top |
|
|
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Mon Nov 06, 2006 9:21 am Post subject: |
|
|
Hello,
We will give you a report of the fault upon return.
Best regards,
Michael |
|
| Back to top |
|
|
Adel
Active User
Joined: 13 Sep 2006
Posts: 5
Location: Montreal
|
| Posted: Tue Nov 07, 2006 1:17 am Post subject: |
|
|
Thank you Michael. I had bought the unit from Interworld and they made a swap with a new one. My unit has the S/N IAT0/033. When the unit gets back to you, would you please keep me informed on what went wrong, either through this forum/topic or to my email?
Regards. |
|
| Back to top |
|
|
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Tue Nov 07, 2006 9:10 am Post subject: |
|
|
Hello Adel,
Sure, no problem. Don't forget to email support@picotech.com for returns process.
Best regards,
Michael |
|
| Back to top |
|
|
|
Cart
Email