Pico Technical Support and Discussion Forum

RichB · Posted: Wed Dec 27, 2006 4:41 pm Post subject: USB ADC11/12 Labview 8.2 vi/llb?

Hello Pico,

I'm looking for the Labview vi/llb for the USB ADC11/12 and can't seem to find it. I downloaded and installed the latest version of the software, PicoFull-r5-15-6, specifiying the usb adc11/12 during the install. there are other files present, such as usbadc11.dll, usbadc11.lib, etc., but not a labview file ending in llb or vi.

Any suggestions?

Thanks, Rich.

ziko · Posted: Wed Dec 27, 2006 6:04 pm Post subject:

Hi and thank you for your post. At the moment we are currently running a limited support service during the Christmas break and as such I do not have access to all our services. I will investigate this next week when we are fully operational, sorry for any inconvenience.

Kind regards

Ziko -tech support

RichB · Posted: Thu Jan 04, 2007 6:22 pm Post subject:

Hello Pico,

have you had an opportunity to look into this request?

thanks, Rich.

ziko · Posted: Mon Jan 08, 2007 4:10 pm Post subject:

Hi thank you for your post, we currently do not have any USBADC11 vi files, however if you have a look at the ADC11 vi, and look at the USBADC11 and ADC11 dll you can create your own vi file. The USBADC11 is based on the ADC11.

I hope this helps

Kind regards

RichB · Posted: Mon Jan 08, 2007 4:15 pm Post subject:

Hello Pico Forum People,

Does anyone have an example vi for the USB ADC11 that they would mind sharing?

thanks, Rich.

gruntman · Posted: Tue Jan 16, 2007 2:46 am Post subject:

Rich,

Attached is a example vi that will work with the USB ADC-11. If you need anything added to it simply let me know and I will help you out. Hope this gets you going.

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com

aaroe

Hi there, a quick question from an unexperience user of LabVIEW.

I've used LabVIEW for a few projects, very basic designs, and have noticed it's ability to export to standalone executables.

Is it possible to make a program in LabVIEW which takes care of the nescessary communiation with the ADC11 and export it as an executable which can be run on other clients with the ADC11 connected?

Basiccaly, what I'm hoping to accomplish is to make a small application which, when run, grabs all the current data from the ADC11 and throws it into a file in some format, which can later be processed. I'm not that skilled in C programming, so I was hoping this could be accomplished with some nifty LabVIEW work. Not that I'm that experienced in LabVIEW either Smile

Any help and feedback regarding this, will be much appreciated.

Yours sincerely
Christian Rasmussen.

SHUN-CHUNG HSIAO · User Joined: 16 Apr 2007 Posts: 3

Hi!

Here is an example of LabVIEW 8.2 to stream ch1 & ch2 datas of ADC-11 to a spreadsheet.

Best Regards!

S.C. Hsiao

Pico Technology

Pico Technical Support and Discussion Forum