Custom Ranges Problem

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
jperras
User
User


Joined: 12 Apr 2006
Posts: 3

PostPosted: Wed Apr 19, 2006 9:53 pm    Post subject: Custom Ranges Problem Reply with quote
Hello,
I'm trying to setup a couple of custom ranges for a clamp-on current probe. I've read the manual and I'm pretty sure I'm doing it correctly. Using the automotive version, if it matters. Version 5.13.7, or an earlier version 5.13.4, after creating the custom range, then closing the program, the custom range disappears entirely. Also the other day, although I can't duplicate it today, when creating the custom range I would set the millivolts to 300. Saying ok to close the dialog box, then reopening the custom ranges, it changed the 300 to a .3, and when actually taking a measurement, it would go off scale, if that makes sense.

Maybe I'm doing something wrong? Embarassed Any help would be great.
Thanks,
Jim
Back to top
Autonerdz
Zen Master
Zen Master


Joined: 20 Nov 2002
Posts: 213
Location: Washington State USA
PostPosted: Wed Apr 19, 2006 10:44 pm    Post subject: Custom Ranges Reply with quote
Hi Jim,

For the program to remember your custom ranges you created, you have to save them. Do this by going to File/Save Settings. Now they will be there next time you start the program. Good idea to also save a psd file with your favorite settings and ranges you can simply recall to recover all your settings. You will need this after you upgrade the software and it defaults to different settings. Then you don't have to make them all again Shocked

Not sure what the other thing was about. Must have been a typo. Use care not to insert any extra characters in the range dialog.

In addition to this forum. you can find extensive resources for automotive users on our web site.
Back to top
jperras
User
User


Joined: 12 Apr 2006
Posts: 3

PostPosted: Thu Apr 20, 2006 12:13 am    Post subject: Reply with quote
Thanks, that did the trick. Just thought it should have saved it after hitting 'OK'. Got stuck and couldn't get past it. Never thought to use 'Save Settings' as I've had the scope for almost 3 years now, and I've got a slew of saved settings that I call up from the 'Automotive' menu. With everything pre-programmed I don't tweak it much anymore.

I've been to your site before. You do a tremendous job with the Pico community. Very Happy Many thanks,

Jim
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group