Poblem with picoscope

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
wsz
Newbie


Joined: 22 Apr 2005
Posts: 1

PostPosted: Fri Apr 22, 2005 8:08 pm    Post subject: Poblem with picoscope Reply with quote
I have a problem with an ADC3206 oscilloscope. I'm running windows xp service pack 1 on a compaq nx9010 notebook.

The driver is installed properly and device manager doesn't report a problem, but when I start Picoscope, 80% of the time it fails to start, saying that it couldn't open the device. Sometimes it looks like picoscope is reinstalling the driver when it starts, because I hear the sound windows playes whan it detects new hardware.

Aditionally, Windows recognizes the device as a USB 2.0 device, but it says it is connected to a 1.1 port, even though I know I connected it to a 2.0 port.

Can you help me?

wsz
Back to top
Sarah
Guest
PostPosted: Mon Apr 25, 2005 9:09 am    Post subject: Reply with quote
Hi

Thank you for your post, I am sorry to hear that you have been seeing problems.

Firstly, whilst the PS3206 reports as a USB1.1 device to begin with it will then enumerate and use USB 2 when the software opens - this is all to do with the way that the unit communicates with the computer when first plugged in.

If the unit will not always open this may be a power issue- try using the power adaptor that came with the unit and see if this helps. Let me know how you get on.

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group