Test and Measurement Forum

Hi,
Is there anyway to set the Pico TC-08 Serial to output data with Hardware Flow Control enabled? (...or is it enabled by default?)

We have a series of these units and we are tring to run them through a Serimux serial switch. They run fine when connected directly to the computer but not through the switches. Serimux have advised us to confirm that the Pico devices have Hardware Flow Control enabled.

Any help or suggestions would be greatly appreciated.
Cheers.

Hi

Thank you for our post.

I have checked with our engineers, and unfortunately our serial TC-08 is not hardware flow control enabled.

Best Regards