Test and Measurement Forum

Dear all,

I'm using the PT-104. This temperature data logger has two possible connections. USB + Ethernet. I'm writing a precedure in Visual Basic 6.0 to read out the temperatures. The procedure runs fine if I'm using the USB-connection for data transfer. There is also a funtion called "UsbPt104OpenUnitViaIp" where I can readout the temperature by the Ethernet connection (USB is still connected for powering). I used the tools "EthernetSettings" to set the IP-address to a free possible address (e.g. 172.017.109.253). Using the written funtion crashes visual basic.
The called procedure has three variables. How can I enter the IP-address and/or how do I have to specify the variable?

Does anybody successfully used the "UsbPt104OpenUnitIp"?

Thanks for your assistance and help!

Regards

Dear all,

I'm really sad, that nobody had any information for me

But I went into contact with a technical guy at picotech. He helped me to get it run. If there is somebody interested he can take a look to the attachment.

I also have another problem. There is a command called "UsbPt104IpDetails" but the datalogger always sends the error code #12 back (Pico_Invalid_Channel_Condition).

I tried to fix the problem with different variable types. But always the same error code back.

Has anybody a helpful information for me?

Best regards

Werner