Cart
Save-on-trigger is just one of a number of functions that are possible with the Alarms feature.
1. Set up PicoScope to display your waveform, and enable triggering:
- 1. Set up PicoScope to display your waveform, and enable triggering:
- save on trigger.jpg (13.91 KiB) Viewed 80 times
2. Select the Tools > Alarms command:
- 2. Select the Tools > Alarms command:
3. You should now be in the Alarms dialog
- 3. You should now be in the Alarms dialog
- alarms dialog.jpg (12.13 KiB) Viewed 80 times
4. Set Event to Capture:
- 4. Set Event to Capture:
- event to capture.jpg (15.21 KiB) Viewed 80 times
5. Select the first item in the Actions list, click Edit, and change Action to Save Current Buffer:
- 5. Select the first item in the Actions list, click Edit, and change Action to Save Current Buffer:
- event to capture.jpg (15.21 KiB) Viewed 80 times
6. Click the button to the right of the File box and enter the name and location of the file to save:
- 6. Click the button to the right of the File box and enter the name and location of the file to save:
- save current buffer.jpg (14.01 KiB) Viewed 80 times
7. Click OK. PicoScope will now save a file on every trigger event
- 7. Click OK. PicoScope will now save a file on every trigger event
- save on trigger.jpg (13.91 KiB) Viewed 80 times
8. Switch off the alarm when you have finished using it, to avoid creating unwanted files.
This is an ideal opportunity for you to give us your valuable feedback and also suggest any enhancements to this particular feature. Please use this thread to discuss this further.
Kindest regards,
Stuart
Technical Specialist
