Test and Measurement Forum

by **hitec** » Thu May 14, 2009 8:56 am

Hello Forum,

I try go get the 2204 work with the Vee Demo programm.

I switch the Vee 9.0 in 6.0-7.0 execution mode.
The programm starts and the init seems to work. The internal relays click some times.
But if I start the measurement, the function >wait for data< waits forever.

Any ideas?
Is the Windows DLL only for 20xx scopes?

Best regards
Hitec

by **Robin** » Thu May 14, 2009 9:33 am

Hi

I don't know much about VEE, but ps2000.dll is the correct library for the 2204.

Robin

by **hitec** » Thu May 14, 2009 12:14 pm

Hi Robin,

is this DLL tested with Win XP SP3 and Vee 9.0 ?

Robin wrote:Hi

I don't know much about VEE, but ps2000.dll is the correct library for the 2204.

Robin

Best Regards
Hitec

by **Robin** » Thu May 14, 2009 12:19 pm

I'm not sure which version of VEE has been used, but were you able to get the example from the SDK (ps2000.vee) to work?

by **hitec** » Thu May 14, 2009 2:07 pm

Hi Robin,

I used two version. First the version from PicoScope 5 and then the SDK version.
Both don't work the same way.
See my first post.

Best regards
Hitec

by **Robin** » Thu May 14, 2009 4:04 pm

Ah, I think I misunderstood your first post. I will have to look in to this.

Has anyone else used the VEE example?

by **hitec** » Wed May 20, 2009 10:34 am

Hi Robin,

we choose the pico scope because we need to operate it with Vee.
And your company wrotes: comes with drivers for LabView and Vee.

Please fix it or I have to replace the scope.
We need working Vee drivers.

Best regards
Hitec

by **Robin** » Thu May 21, 2009 10:09 am

Hi

The drivers do work with VEE and LabVIEW. I think there might have been a problem with that example, however.

I have tested this example with a 2204.

I hope it is useful.

Robin

by **hitec** » Tue May 26, 2009 2:44 pm

Hi robin,

sorry for the delay. I was a little bit busy on other projects.

The problem was the example included in PicoScope 5 and the SDK.
The new one works.

Thanks a lot for the help.

Please change the example in PicoScope 5 and the SDK.

Best regards
Hitec

by **Robin** » Tue May 26, 2009 5:02 pm

I'm glad it's working. This example will be in the next SDK release.

Robin

Pico Technology

Test and Measurement Forum

Pico Scope 2204 and Vee 9.0

Pico Scope 2204 and Vee 9.0

Something yet in progress? Or dead end with Vee?

Now it works!

Who is online