Test and Measurement Forum

by **Guest** » Wed Nov 12, 2008 7:01 am

DEAR FRIENDS,

I have bought ADC11 from pico technologies long back. now the picosoft software disket is missing . so i cannot use it . if anybody is having softwares comaptible for ADC 11 please inform me. whether it can download from anywhere?
thanks in advance

by **Robin** » Wed Nov 12, 2008 9:26 am

Hello

All of Pico's software is freely downloadable from http://www.picotech.com/download.html

Robin

by **Guest** » Wed Nov 12, 2008 9:37 am

sir,

thanks for your reply .I have downloaded pico log and tried to acqiure data through lpt1 . it shows a constant reading 2.5 v throghout the run . my sensors out put is 1 v only . what might be the reason? please help me

by **Robin** » Wed Nov 12, 2008 9:49 am

Without seeing your circuit, it is difficult to say. If possible, try connecting a low voltage (<2.5 V) supply and see if you get the correct reading.

Robin

by **Guest** » Wed Nov 12, 2008 9:58 am

Sir,

i have connected a 1 v dc supply to one of the channels of ADC11 and started recording. it shows 2.5v always. is it due to any hardware problem?

by **Robin** » Wed Nov 12, 2008 10:03 am

Do you get the same on all channels?

Robin

by **Guest** » Wed Nov 12, 2008 10:44 am

sir,

yes all channel bevaves similar.

by **Guest** » Wed Nov 12, 2008 10:50 am

sir,

one more thing i noticed is without any input supply also it shows 2.5 volt..
please help me to resolve this issue

ajesh

by **Guest** » Wed Nov 12, 2008 11:00 am

sir,

i have succeeded .. thanks for ur advice. i need a small favor from u

by **Guest** » Wed Nov 12, 2008 11:15 am

how to import the spred sheet data from excel?

by **Robin** » Wed Nov 12, 2008 12:21 pm

Hi

It is not possible to import data to PicoLog.

It is possible to export data to Excel. You can save data as a CSV file that can be opened by Excel. You can copy and paste or use DDE.

I hope this helps

Robin

by **Guest** » Fri Nov 14, 2008 7:39 am

ya . i did it. i have copied the data to excel. thanks for ur advice. one morething , i would like to buy one more ADC card for 4-20 ma . which card is best for this purpose?
thanks in advance

by **Robin** » Fri Nov 14, 2008 9:16 am

You can use your ADC11 with a 120 Ohm shunt resistor for measuring 4-20 mA signals.

Robin

Pico Technology

Test and Measurement Forum

ADC11

ADC11

picolog

thanks

Who is online