2-channel spectrum analyzer functions

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
scott miller
Guest
PostPosted: Wed May 21, 2003 7:10 pm    Post subject: 2-channel spectrum analyzer functions Reply with quote
1. Can the picoscope software calculate a frequency response?
2. Are any of your units equipped with output signal generators?
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 607

PostPosted: Thu May 22, 2003 10:19 am    Post subject: Reply with quote
Hi Scott,

You can view the frequency response in the spectrum analyser, but you are not able to measure it.

The 200 series (ADC-212, ADC-216, ADC-200) all provide a signal generator.

Best regards,
Back to top
matthew
Site Admin
Site Admin


Joined: 25 Sep 2002
Posts: 133
Location: Cambridgeshire, UK
PostPosted: Tue May 27, 2003 11:32 am    Post subject: Reply with quote
Hello Scott,

It sounds like you might be trying to measure the full frequency response of a system using a sweeping signal generator? If this is the case, then our current products won't be suitable.

The built in signal generator is only for indication, and there is no facility to synchronize the units with an external sweeping signal generator. You could do this manually yourself by recording a set of discreet measurements, however this can be laborious work.

Sorry I couldn't give you better news (if this is what you were trying to do).

Best Regards,
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group