|
|
| Author |
Message |
Larry
Guest
|
 Posted: Fri Dec 15, 2006 3:15 pm Post subject: Picoscope 3423 commercial automotive kit |
 |
|
| I want to purchase an oscilloscope to measure charging voltage spikes while driving a car. I need to log large quantities of data during this test. I also need to capture these spikes in small time frames (ms). Is this the correct tool for the job? And will it have detailed instructions for installation? Thanks, Larry |
|
| Back to top |
|
 |
davidj
Site Admin
Joined: 11 Oct 2006
Posts: 67
Location: St. Neots, Cambs, UK
|
| Posted: Mon Dec 18, 2006 9:20 am Post subject: Automotive enquiry |
|
|
Hello Larry
Thank you for your post.
As you are interested in data capture over time, your application calls for a data logger rather than an oscilloscope which is included in the kit you mrntioned.
Please take a look at our data logger range here
http://www.picotech.com/data.html
Also have a look at the PicoLog software - you can download and use in demo mode to get an idea of the capability on offer. |
|
| Back to top |
|
|
Autonerdz
Zen Master
Joined: 20 Nov 2002
Posts: 211
Location: Washington State USA
|
| Posted: Mon Dec 18, 2006 4:36 pm Post subject: recording |
|
|
Hi Larry,
Let me offer an opposing point of view 
The new capabilities of PicoScope 6 and the 3000 series automotive scopes allow for unprecedented high speed data capture over long periods of time. Here is an example:
http://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1156367906 |
|
| Back to top |
|
|
|
Cart
Email