|
|
| Author |
Message |
electro
User
Joined: 27 Jul 2006
Posts: 3
Location: Hants
|
 Posted: Thu Jul 27, 2006 10:18 am Post subject: adc200.vi in LabVIEW 8.0 |
 |
|
| I am trying to use adc200.vi (parallel port) in LabView 8.0 on a Windows XP system. Whenever I try to run it comes back with the error message -VI "adc200.vi" was stopped at Call Library Function Node 0x2074 of subVI "adc200.vi"". Can you help me please.
|
|
| Back to top |
|
 |
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Mon Jul 31, 2006 11:08 am Post subject: |
|
|
Hello,
I have had a look at this VI and found a couple of problems.
Fisrtly, the ADC200_run function was causing a crash as there was a missing returns declaration. Next, there was no ADC200_close function call which was preserving the driver within the LabVIEW development enviroment. The only way to escape this was to restart LabVIEW. I have now added a close function at the end of the stacked sequence.
This should help you out, you will need to register and post a reply to see the attachment in the topic review window.
Best regards,
Michael
| Description: |
|
Download |
| Filename: |
adc200.zip |
| Filesize: |
24.01 KB |
| Downloaded: |
2397 Time(s) |
|
|
| Back to top |
|
|
electro
User
Joined: 27 Jul 2006
Posts: 3
Location: Hants
|
| Posted: Mon Jul 31, 2006 3:22 pm Post subject: adc200.vi |
|
|
| Thanks I'll try it out
|
|
| Back to top |
|
|
electro
User
Joined: 27 Jul 2006
Posts: 3
Location: Hants
|
| Posted: Mon Jul 31, 2006 3:32 pm Post subject: adc200.vi |
|
|
| I've registered and sent you a reply but the attachment is eluding me. Am I missing something.
|
|
| Back to top |
|
|
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Tue Aug 01, 2006 9:16 am Post subject: |
|
|
Hello,
Go to the post reply section and scroll down. You will see the topic review section and then scroll down to through the messages until you see my message with the attachment.
Best regards,
Michael
|
|
| Back to top |
|
|
MEbner
Newbie
Joined: 13 Sep 2006
Posts: 1
|
| Posted: Wed Sep 13, 2006 8:57 pm Post subject: |
|
|
Hi,
I'm having the same problem with my .vi, however, I have Labview 7.1, and the version posted here is for 8.0. Would it be possible to get the updated .vi in a version compatible with 7.1?
Thanks.
|
|
| Back to top |
|
|
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Wed Oct 11, 2006 10:56 am Post subject: |
|
|
Hello,
Please find the VI you requested attached to this post.
Please pst a reply and scroll down through the previous post to see the attached example.
Best regards,
Michael
| Description: |
|
Download |
| Filename: |
adc200.vi |
| Filesize: |
94.7 KB |
| Downloaded: |
2365 Time(s) |
|
|
| Back to top |
|
|
RAVI
Active User
Joined: 05 Dec 2006
Posts: 5
|
| Posted: Tue Dec 05, 2006 9:06 pm Post subject: adc200 |
|
|
| labview 8 attachment
|
|
| Back to top |
|
|
mikebettinger
Newbie
Joined: 29 Dec 2006
Posts: 1
|
| Posted: Fri Dec 29, 2006 6:39 pm Post subject: ADC200 labview attachment |
|
|
| How do I get a copy of this file? Thanks, Mike.
|
|
| Back to top |
|
|
liurong82
User
Joined: 03 Jul 2008
Posts: 2
|
| Posted: Thu Jul 03, 2008 12:22 pm Post subject: |
|
|
| very good!thanks
|
|
| Back to top |
|
|
liurong82
User
Joined: 03 Jul 2008
Posts: 2
|
| Posted: Thu Jul 03, 2008 12:42 pm Post subject: |
|
|
| why i can't download the atachment!?????
|
|
| Back to top |
|
|
|
Cart
Email