Second hand Picoscope supplied without a Parallel Cable

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
Phil Winder
Guest
PostPosted: Wed Jun 14, 2006 6:09 pm    Post subject: Second hand Picoscope supplied without a Parallel Cable Reply with quote
Hi, ive just purchased a second hand ADC-200 and it has come without a parallel cable. I have had a search around and found no mention of what sort of Parallel cable is being used. With the confusion of the USB-Parallel converter using non-standard wiring layouts, I thought Id better check before I start plugging random cables in.

Could you please provide a description/wiring diagram to the construction of a Picoscope Parallel cable?

I would prefer not to purchase another from yourselves since I have some spare parallel cables lying around.

Many thanks,

Phil Winder
Back to top
alan
Site Admin
Site Admin


Joined: 25 May 2006
Posts: 46

PostPosted: Wed Jun 14, 2006 6:35 pm    Post subject: Reply with quote
Hi,

The parallel cable is a D25 male to female. The pins are wired 1-1, 2-2, 3-3 etc. All pins are connected.

You can get the latest software from the web & hopefully you have the power supply - if not it needs between about 9V and 24V and the centre pin of the power connector is positive.

Regards
Alan
Back to top
Guest
PostPosted: Wed Jun 14, 2006 7:25 pm    Post subject: Reply with quote
Excelent. Thanks, Its working fine.

Oh, and thanks for keeping the old devices in the new software!

Phil Winder
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group