Posted: Wed Feb 22, 2006 10:40 am Post subject: Adc-100 used to analyse EMG signals
Can I use the ADC-100 to collect EMG signals, ranging in mV and between 0 - 2000Hz.
Could I use the frequncy analyzer to look at frequncy components of the signal.
Is that EMG as in Electromyography? Not really familiar with these signals but the ADC-100 is certainly capable of sampling signals in the 0-2000Hz range. The spectrum analyzer function in PicoScope will allow you to look at the frequency components of the signal.
Cart
Email