Problems with the graph

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoLog
Author Message
Fritz 2
Guest
PostPosted: Fri Jul 15, 2005 4:53 pm    Post subject: Problems with the graph Reply with quote
We want to log electrostatic events and show this direct to our customers. For this we bought an ADC42. On the old computer only with the ADC42 it works somehow. With a new PC and an Pico USB/Parallel Converter and the newest Software the graph will only display every 4 seconds.
On the Manual we found that the continious Monitoring will only work if you display one value every second? Can this be right? We cant belive this, its to slow! What can we do to make it faster- we need 10 values per second. We want to show this in a scrolling mode and display a graph.

We want to run the the simplest task you can think off- a slow +/- 1,0V DC signal should be shown as a graph over a time axis.
data fritz
Back to top
Sarah
Guest
PostPosted: Mon Jul 18, 2005 11:48 am    Post subject: Reply with quote
Hi

Thank you for your post.

I believe this update rate of the graph is a software bug - I have also seen this happen. You might like to try an older version of the software. You can download some from our website at:

http://www.picotech.com/software-archive.html

Hope this helps

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoLog
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group