TC-08 Serial - Hardware Flow Control

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Serial Port Products
Author Message
Fearpig
Guest
PostPosted: Thu Jul 07, 2005 9:18 am    Post subject: TC-08 Serial - Hardware Flow Control Reply with quote
Hi,
Is there anyway to set the Pico TC-08 Serial to output data with Hardware Flow Control enabled? (...or is it enabled by default?)

We have a series of these units and we are tring to run them through a Serimux serial switch. They run fine when connected directly to the computer but not through the switches. Serimux have advised us to confirm that the Pico devices have Hardware Flow Control enabled.

Any help or suggestions would be greatly appreciated.
Cheers.
Back to top
Sarah
Guest
PostPosted: Thu Jul 07, 2005 9:25 am    Post subject: Reply with quote
Hi

Thank you for our post.

I have checked with our engineers, and unfortunately our serial TC-08 is not hardware flow control enabled.

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Serial Port Products
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group