ADC-11 (USB), Visual Basic 6.0, Port Open Problem

 
Post new topic   Reply to topic    Pico Technology Forum Index -> VB and VBA (Excel, Access)
Author Message
SlavaVB
User
User


Joined: 02 Jul 2005
Posts: 2
Location: New York
PostPosted: Sat Jul 02, 2005 2:08 am    Post subject: ADC-11 (USB), Visual Basic 6.0, Port Open Problem Reply with quote
Hello, I just got my ADC-11 (USB), and it works great with the PicoScope software. However when I tried to get the Visual Basic 6.0 example (adc1132.vbp) working, there were erros. PicoScope was closed during this time. The error was displayed in the example's output list box and said, "Unable to open ADC-11, USB-PP1 not opened, device not found." I even tried setting the port variable to 102, 103 and 104 with no luck. Would you happen to know a way I can get around this? I'm using windows XP btw. Thank you for your time and effort.

P.S.: I know the data unit can log 15k points per second, but do you know how fast i can get software readings, one at a time fromt he data logger? Also what is the delay between the reading and the point in time when the software is capable of getting the value.
Back to top
Sarah
Guest
PostPosted: Tue Jul 05, 2005 8:23 am    Post subject: Reply with quote
Hi

Thank you for your post.

You need to ensure that the port is set to 101 and the product number is 111. The product number needs to be different to that of the Parallel version.

Hope this helps

Best Regards
Back to top
SlavaVB
User
User


Joined: 02 Jul 2005
Posts: 2
Location: New York
PostPosted: Tue Jul 05, 2005 8:34 am    Post subject: Reply with quote
Thank you so much! It works! It works! You are uber leet! Razz
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> VB and VBA (Excel, Access)
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group