application

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
willie
Guest
PostPosted: Mon Jun 20, 2005 1:48 pm    Post subject: application Reply with quote
kindly advise the following application

we intend to use Picoscope 3000 series

One of the main usages of the scope is to analyze digital pulses. Most of
the signal period
can go as low as micro seconds. i.e. 1 microsecond. Note that the signal is
not periodic.
I would like to capture a signal which may only have a length of
miliseconds, stop, and view
the signal.
andy
Back to top
Sarah
Guest
PostPosted: Tue Jun 21, 2005 1:16 pm    Post subject: Reply with quote
Hi Andy

Thank you for your post.

This application sounds fine. The PS3000 is sufficiently fast that you should be able to gain enough points over a trace lasting milliseconds to see the pulses that you mention. What I would recommend is ensuring that the speed at which you believe you need to sample is within the capabilities fo the unit.

Hope this helps

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group