achi02
Newbie
Joined: 06 Apr 2005
Posts: 1
|
 Posted: Wed Apr 06, 2005 12:15 pm Post subject: ADC-11/12 and LabVIEW 7.0 example problems |
 |
|
Hello everybody,
I am currently dealing with some problems with ADC-11/12 (parallel port) and LabVIEW 7.0. I am using the newest Pico software, version 5.12.0 and Windows XP.
I am trying to use the LabVIEW example wich i downloaded from the official website but without any luck. As I see it, there must be an error in the provided example.
I am opening adc11.llb with LabVIEW and adc11_single.vi from in there.
A label on the frontpanel of the example tells me that Ports 1 is for LPT1, Ports 2 is for LPT2 and so on......altough if I take a look at the "Numeric properties for Port" and look at "description" tab it says:
| Quote: | | "Serial port that the TC-08 is connected to: use 1 for COM1, 2 for COM2 etc" |
...   so...as you all can read I am a bit confused.....the example was dowloaded especially for ADC-11/12 but it seems that it is made for the TC-08 thermocouple data logger...what is the alternative?
Regards,
Adrian |
|
Cart
Email