|
|
| Author |
Message |
cgreisen
User
Joined: 21 Jan 2005
Posts: 3
|
 Posted: Fri Jan 21, 2005 10:50 am Post subject: ADC16 not found by PLW Recorder |
 |
|
When I try to start the software (PicoLog for Windows, Release 5.10.7), I just get the message:
ADC16 driver version 2.4
ADC16 Unit not found
I have checked that it is plugged into the serial port, restarted the PLW software a few times (as it is recommended in the manual) and tried to select both COM1 and COM2. Nothing worked.
Any suggestions ? |
|
| Back to top |
|
 |
Kieran
PICO STAFF
Joined: 20 Jan 2005
Posts: 8
Location: St Neots, Cambridgeshire, UK
|
| Posted: Fri Jan 21, 2005 1:54 pm Post subject: |
|
|
Hello,
Thank you for your post.
First, we need to elimate whether it is a faulty unit. Please install and run on another PC if you have one available.
Please let me know the outcome of the test. |
|
| Back to top |
|
|
cgreisen
User
Joined: 21 Jan 2005
Posts: 3
|
| Posted: Fri Jan 21, 2005 3:44 pm Post subject: ADC16 on serial port. Just a conflict with other devices |
|
|
Thanx.
I tried installing on a different (fresh) machine. That worked. I'll probably just have to uninstall applications using the same port.
Best regards,
Christoffer |
|
| Back to top |
|
|
Kieran
PICO STAFF
Joined: 20 Jan 2005
Posts: 8
Location: St Neots, Cambridgeshire, UK
|
| Posted: Fri Jan 21, 2005 4:03 pm Post subject: |
|
|
Hi
The problem may have been a lack of current supply from the RS232 port on the first machine, which is the case on some computers.
Let me know the outcome. |
|
| Back to top |
|
|
cgreisen
User
Joined: 21 Jan 2005
Posts: 3
|
| Posted: Mon Jan 24, 2005 9:36 am Post subject: Just had to switch off Syncronization over COM1 |
|
|
It was my calender syncronization software that occupied the port (for connecting a PalmV cradled. Shutting that service down enabled PLW.
/Christoffer |
|
| Back to top |
|
|
|
Cart
Email