Picoscope meter, minimum frequency

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
Tresco
Active User
Active User


Joined: 18 Nov 2004
Posts: 5
Location: Australia
PostPosted: Thu Nov 18, 2004 2:31 am    Post subject: Picoscope meter, minimum frequency Reply with quote
what is the minimum frequency that can be measured on the AC Meter and Freq Meter?

Mine seems to drop-out below 50Hz (ADC-42)

I'd like to be able measure down to 0.5 Hz - could this be considered for future software updates?

thanks...
Back to top
Sarah
Guest
PostPosted: Fri Nov 19, 2004 12:13 pm    Post subject: Reply with quote
Hi

Thank you for your post

The best way to measure lower frequencies is to use Picolog and increase the scan time. This should enable you to see lower frequencies.

Hope this helps

Best Regards
Back to top
Tresco
Active User
Active User


Joined: 18 Nov 2004
Posts: 5
Location: Australia
PostPosted: Sat Nov 20, 2004 3:43 am    Post subject: AC Voltmeter in picoscope Reply with quote
could you please advise what is the minimum frequency that the AC Voltmeter will measure (in picoscope)
Back to top
Sarah
Guest
PostPosted: Thu Nov 25, 2004 3:33 pm    Post subject: Reply with quote
Hi

Thank you for your post.

I am unable to give an exact figure as to the minimum value. However you will find the measurement function on the trace view to be a better measuring tool.

Hope this helps

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group