Clarification of PicoScope specs

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
gertcronje
Newbie


Joined: 21 Oct 2004
Posts: 1

PostPosted: Thu Oct 21, 2004 10:39 am    Post subject: Clarification of PicoScope specs Reply with quote
Hi

I'm interested in the 3205 PicoScope. I have a few questions:

Your spec sheet states that it has a 100MHz bandwidth. In this forum, however you repeatedly say it only has a 50Mhz bandwidth. Which is the correct spec?

Assuming the 100MHz is correct, you state that the single shot mode does 100MS/s. Is this on both channels or on a single channel? I.e. when measuring both channels is the sampling interlaced between the two or is each channel sampled at 100MS/s?

Thanks

Gert Cronje
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 610

PostPosted: Fri Oct 22, 2004 10:48 am    Post subject: Reply with quote
Hi.

Thank you for your post.

Analogue bandwith is 100MHz (this bandwith is above Nyquist and is for ETS).

Maximum sample rate 100MSps on both channels ie both channels can simulaneously sample at the same time.

Best regards,
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group