ADC-100 using Picoscope displays small noisy square wave.

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Parallel Port Products
Author Message
Ken Howell
Guest
PostPosted: Sat Jan 18, 2003 8:56 am    Post subject: ADC-100 using Picoscope displays small noisy square wave. Reply with quote
ADC-100 using Picoscope displays small noisy square wave.

I'm trying to use an old ADC-100 on modern PCs but the displayed signal seems to be clipped below 50mV.

I noticed from an earlier posting that this is likely to be due to a missing parallel-port adaptor. The adaptor here seems to have been lost.

Is it possible to get a replacement adaptor, or (better still) what is the configuration of the adaptor? ... I assume it to be just a matter of some cross-overs within the 25-way "D" type connector.
Back to top
matthew
Site Admin
Site Admin


Joined: 25 Sep 2002
Posts: 133
Location: Cambridgeshire, UK
PostPosted: Tue Jan 21, 2003 2:53 pm    Post subject: Reply with quote
Ken,

Email me your full address and contact details to tech@picotech.com and I will get an adapter send out to you.

Best Regards,
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Parallel Port Products
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group