Clarification on Picoscope 3000 range

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
mike_ims
Guest
PostPosted: Fri Aug 20, 2004 7:31 pm    Post subject: Clarification on Picoscope 3000 range Reply with quote
The spec sheet for the picoscope 3000 claims the ranges are...

Quote:
10 mV to 2 V/div


The "/div" is the confusing part for me.

Quite a few similar picoscopes (adc100, 200, 212) have ranges of...

Quote:
±50 mV to ±20 V in 9 ranges


Can I infer that the picoscope 3000 series has ranges from ±10 mV to ±2 V in X ranges?

Thanks,
-Mike
Back to top
Sarah
Guest
PostPosted: Wed Aug 25, 2004 9:25 am    Post subject: Reply with quote
Hi Mike

Thank you for your post.

The /div reference in the specifications refers to the oscilloscope display screen in the software. The screen is divided up into 10 equal divisions just as traditional oscilloscope displays are. Therefore, 2V/div gives a range of ±20V as an input range.

So the input ranges of the PS3000 series are ±100mV to 20V in 8 ranges.

Hope this helps

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group