Using the Digital output on ADC11

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Parallel Port Products
Author Message
Phillip Green
Guest
PostPosted: Wed Nov 06, 2002 12:49 pm    Post subject: Using the Digital output on ADC11 Reply with quote
How do you use the digital output on the ADC11, I need this to start my experiment, before I can begin data logging. In the ADC11 manual a second digital input is mentioned, but I can't find it.
Back to top
James
Guest
PostPosted: Wed Nov 06, 2002 3:56 pm    Post subject: ADC11 digital output Reply with quote
If you need to use the digital output, you will need to write your own software using our examples, as PicoLog and PicoScope do not control it.
These packages just set it to be left on.

The functions you need are:

adc11_set_do and adc11_set_do2 contained in the adc11.dll file.

The second output is only available if you specifically ask for it when ordering your ADC11 from us.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Parallel Port Products
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group