Scope of Enviromon functionality

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
KarenSwan
Guest
PostPosted: Wed Mar 10, 2004 2:04 pm    Post subject: Scope of Enviromon functionality Reply with quote
We already have an ADC-11 with PicoLog and are using it to view various renewable energy statistics from a small station e.g. windspeed, voltages, currents, light levels.

We would like to put the results on the web if possible but I understand this is not possible through PicoLog. I noticed that Enviromon has this capability but doesn't seem designed to work with the data logging hardware we already have. Am I right? If so, do you have any other suggestions?

Thank you
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 607

PostPosted: Fri Mar 12, 2004 9:07 am    Post subject: Reply with quote
Hi,

You are correct in your explanation. Picolog is not set up to interact with a webpage directly and the ADC-11 cannot be used with the Enviromon System.

To achieve you aim, you need to find some way of getting the data out of the ADC-11 in real time, and then display it in the webpage. The ADC-11 driver can be used in c/c++, delphi, VB. It might be possible to write your own software that is then displayed on a webpage. Using cgi.bins.

Unfortunately, it is not possible to provide support on this, but perhaps someone else on the forum could help/point you in the correct direction.

Best regards,
Back to top
KarenSwan
Guest
PostPosted: Fri Mar 12, 2004 12:00 pm    Post subject: Thanks Reply with quote
Thanks Mark, that's a bit beyond me for now but perhaps in the future Smile

At least I know the score
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group