|
|
| Author |
Message |
Guest
|
 Posted: Wed Jan 14, 2004 3:29 am Post subject: TV Antenna Fne Tuning |
 |
|
| What would be the most appropriate product for fine tuning and measuring signal strength from a UHF frequency television antenna? |
|
| Back to top |
|
 |
markspencer
Site Admin
Joined: 07 May 2003
Posts: 610
|
| Posted: Wed Jan 14, 2004 9:39 am Post subject: |
|
|
Hi,
Thank you for your question to advise you on which unit may be suitable please could you provide me with the maximum frequency that you would need. Is the signal repetative?
Best regards, |
|
| Back to top |
|
|
Omar
Guest
|
| Posted: Thu Feb 03, 2005 9:31 pm Post subject: UHF/VHF |
|
|
I am also interesting in fining tuning a tv antenna signal for VHF and UHF signals. The range needed is 50-905 mHz.
Would the adc-40 work for this? I don't have a logging need, either. |
|
| Back to top |
|
|
Sarah
Guest
|
| Posted: Fri Feb 04, 2005 9:25 am Post subject: |
|
|
Hi
Thank you for your post.
The ADC-40 would not be suitable for this as it has a spectrum bandwidth of 10kHz and this is much lower than the signals you are interested in.
Our fastest scope is currently the PS3206 and has a spectrum bandwidth of 100MHz. This would enable you to see some of the frequencies that you are interested in, however not the ones at the faster end of what you state.
Hope this helps
Best Regards |
|
| Back to top |
|
|
|
Cart
Email