calibration of ADC-216

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
lynn.kern
Guest
PostPosted: Fri Dec 05, 2003 5:57 pm    Post subject: calibration of ADC-216 Reply with quote
Our organization is contemplating using the ADC-216 to perform some temporal measurements. There is a requirement for regular calibraiton. The limits of the cal are defined as +/- 0.1 of the finest time measurement, which is 3 ms. My question is, do I have to remove and send the unit back to you folks for cal? If so, do you have a product that allows for calibration in the field?
thanks!!
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 607

PostPosted: Mon Dec 08, 2003 9:07 am    Post subject: Reply with quote
Hi,

The ADC-216 does have to come back to us for calibration and the calibration is valid for one year from date of issue. We do not have any unit that can be calibrated in the field.

Best regards,
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group