usb 2 parallel & ADC212

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Parallel Port Products
Author Message
dc
Newbie


Joined: 09 May 2008
Posts: 1

PostPosted: Fri May 09, 2008 9:34 am    Post subject: usb 2 parallel & ADC212 Reply with quote
Hi guys,

I am having trouble with my picoscope. I am using picotech usb 2 parallel converter with a ADC 212.
When I plugged my usb2parallel converter in after the installation it recognized I had plugged it in and assigned it a driver and said it was ready for use.
I then powered up my ADC212 and plugged in my usb2serial adapter.
I launched picoscope & the following "got ADC212 not connected".
I am running vista home premium (tried on XP as well).
The power led is on on the front of the adc212 but the led on the usb2parallel is not.
have you guys any software to test comms between the adc212 & the usb2parallel convert.
I have a parallel port on my desktop machine and the adc212 works fine but I only have usb on the laptop.

Can you help??

thanks in advance
------------------------
------------------------
edit
------------------------
The Led is has now turned on, on the usb2parallel converter.
Picoscope will still not recognize the device
Back to top
picojohn
Site Admin
Site Admin


Joined: 11 Jun 2007
Posts: 311

PostPosted: Fri May 09, 2008 2:29 pm    Post subject: Reply with quote
Hello DC,

It is possible that the software has not correctly installed, therefore, please uninstall the software and try again using the latest software from our website (http://www.picotech.com/software.html).

Please ensure that you follow the installation process for the USB/parallel converter as explained here :http://www.picotech.com/support/kb/SoftwareInstallation-kb141

Regards
John
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Parallel Port Products
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group