|
|
| Author |
Message |
Guest
|
 Posted: Sat Apr 26, 2008 3:02 pm Post subject: Driver |
 |
|
| I have an ADC-212 and want to use its driver to gather data for my own program. Can that be done? (By the way, I can't log on and can't find a way to get help with logging on without first logging on.) |
|
| Back to top |
|
 |
picojohn
Site Admin
Joined: 11 Jun 2007
Posts: 365
|
| Posted: Mon Apr 28, 2008 9:45 am Post subject: |
|
|
Hello Guest,
If you wish to write your own application software, you may refer to the programming examples provided as follows:
During software installation when prompted for 'setup type' select 'Custom' and ensure that 'programming examples' are installed by removing the red cross. The example programmes will be installed on the root drive in the following directory: C:/Program Files/Pico Technology/Pico Full/Examples
You will also find programming support for various languages in the user manual (http://www.picotech.com/document/pdf/adc2xx.pdf), along with an explanation of the API routines for the unit.
Regards
John |
|
| Back to top |
|
|
Guest
|
| Posted: Mon Apr 28, 2008 3:27 pm Post subject: Driver |
|
|
| I did that but there are no programming examples for the ADC212. There are for the ADC200--are those applicable to any ADC2xx? |
|
| Back to top |
|
|
picojohn
Site Admin
Joined: 11 Jun 2007
Posts: 365
|
| Posted: Tue Apr 29, 2008 10:31 am Post subject: |
|
|
Hello Guest,
Those are applicable to any ADC2xx
Regards
John |
|
| Back to top |
|
|
|
Cart
Email